The product page describes this sheet in terms of movement rather than colour: it has a "luminous pearl-white finish with delicate rainbow reflections", and "soft tones of pearl white, pale blue, lavender, and light green emerge as the viewing angle changes".

That is worth taking literally. Because the listing ties the colour to the viewing angle, where you put the tile decides how much of the effect you actually see. Below are ten rooms to consider, ordered from fully wet to fully dry.

The room scenes shown below are design visualizations built from the actual tile to show placement and scale. Product photos on the product page are shot from the physical product.

The sheet, in numbers

Material Iridescent glass mosaic
Sheet size 12.87" × 12.87" (327 × 327 mm)
Chip size 0.79" × 0.79" (20 × 20 mm)
Thickness 0.16" (4 mm)
Finish Glossy iridescent glass, pearl white with soft rainbow reflection
Listed properties Waterproof and moisture resistant, fade-resistant, easy to clean
Use Indoor and outdoor; residential and commercial

Two of those numbers decide where the sheet can go. The 20 × 20 mm chip means one sheet carries a dense grid of small pieces, which is what allows it to sit on a curved surface such as a pool waterline or a rounded tub deck. At 4 mm it is a thin, light assembly, which is why the listing specifies it for walls as well as flat runs. Substrate and trim requirements depend on your location, so confirm those with your installer.

Ten rooms

Pearl white iridescent glass mosaic tile at a swimming pool waterline, small square chips catching daylight
1. Pool waterline. Swimming pools are named among the listing's intended applications. At the waterline the tile sits at the splash line and takes constant wetting, and the small chip size is what makes a curved coping line manageable.
Iridescent glass mosaic on resort pool steps, pearl white chips under bright sun
2. Pool steps. A small-chip mosaic has many more grout lines than a large-format tile, which is one reason small formats are used on treads. Step-edge visibility is a safety matter — confirm the requirement for your pool with your installer before specifying.
Glass mosaic water feature wall in pearl white iridescent finish
3. Spa water feature. Spas and water features are named on the listing. The product description describes the colour shift as something that appears "as the viewing angle changes", so this is a surface to see in your own light, at your own angle, before you commit to a full wall.
Pearl white glass mosaic edging a garden koi pond
4. Pond edge. Fish ponds are named on the listing, and outdoor use is listed for this product. The tile sits at the splash line and takes constant wetting, so the fade-resistant finish on the listing is the property to weigh here.
Walk-in shower wall clad in pearl white iridescent glass mosaic
5. Walk-in shower. Shower walls are named on the listing. One way to keep a reflective finish from overwhelming a small room is to run it full height on a single wall and use a quieter field tile on the others.
Bathroom vanity wall in iridescent glass mosaic, soft pearl white tones
6. Vanity wall. A narrow band behind the basin uses only a few sheets, which keeps the cost of trying it low while putting the finish at eye level.
Bathroom backsplash in pearl white iridescent glass mosaic tiles
7. Bathroom backsplash. Bathroom backsplashes are named on the listing, and glass is non-porous, so splash marks wipe off rather than soaking in and no sealing is required. Measure your splash height against the 327 mm sheet and let your installer work out cuts and waste.
Kitchen accent wall clad in iridescent glass mosaic, rainbow reflections under warm light
8. Kitchen accent wall. The listing names pools, spas, water features, fish ponds, shower walls, bathroom backsplashes and decorative walls — kitchens are not on it. If you want this sheet in a kitchen, the honest advice is to order a sample and look at it under your own lighting and next to your own cabinetry first.
Hotel pool bar counter faced in pearl white iridescent glass mosaic
9. Hospitality bar face. Commercial use is listed for this sheet. On a bar front the questions are the ones your installer should answer: how much contact the surface will take, and what grout and substrate suit a vertical commercial application.
Bathtub surround in iridescent glass mosaic, pearl white chips around a curved tub edge
10. Tub surround. The same chip-size logic as the pool waterline, indoors: small pieces are what allow the sheet to follow a curved tub deck.

Where the shimmer actually shows up

The product page describes the effect in one clause: the soft tones "emerge as the viewing angle changes". Two practical consequences follow from that, and both are worth knowing before you order.

  • The angle matters. The colour shift is tied to the angle between the light, the surface and your eye. A wall you only ever see straight on gives you less of it than a corridor, a stair or a shower you walk into.
  • The shift is soft, not loud. The listing describes pearl white with pale blue, lavender and light green — not a saturated colour. Next to a busy patterned tile it will have to compete.

Both of those are reasons to order a sample first and move it through your own light. That is the only reliable way to judge whether the effect reads in your room.

Practical notes from the product page

  • Wet and dry. Listed as waterproof, moisture resistant and suitable for both indoor and outdoor use.
  • Colour. Fade-resistant finish; pearl white with pale blue, lavender and light green appearing as the angle changes.
  • Cleaning. Glass is non-porous and listed as easy to clean and maintain — no sealing, unlike natural stone.
  • Batch variation. The listing notes that slight colour differences may occur between production batches. If a project has strict colour requirements, request a sample from the current batch before ordering.

Ordering

Sheets ship from our workshop in Foshan. Samples are available, and the cost of a sample is credited back in full against a subsequent project order. For larger quantities we quote shipping against your postcode and total area; the listing notes that larger orders usually benefit from lower shipping costs per box.

Frequently asked questions

Is this glass mosaic suitable for a swimming pool?

The product listing names swimming pools, spas, water features and fish ponds among its intended applications, and lists the tile as waterproof, moisture resistant and suitable for outdoor use. For a submerged installation, the setting materials and waterproofing system matter as much as the tile, so confirm those with your installer.

How many sheets do I need?

Each sheet is 327 × 327 mm. To work out how many you need, divide your net area by the sheet's area (0.327 m × 0.327 m), then add your installer's recommended cutting waste allowance.

Can it go on the floor?

The listing specifies wall and decorative applications including shower walls, bathroom backsplashes and luxury decorative walls. For a floor, ask your installer to confirm the slip rating you need for the location — particularly in a wet area.

Does the rainbow effect fade over time?

The finish is listed as fade-resistant. To keep the surface intact, clean with non-abrasive products and avoid scouring pads.

How does this differ from iridescent ceramic tile?

We set out the differences side by side in Iridescent vs Metallic vs Glass Tile rather than summarising them here. The short version for ordering purposes is that the two materials are specified differently, so ask your installer which suits your location.

Related reading

View the Pearl White Rainbow Shimmer glass mosaic →

Going further: for a stone alternative to glass in wet rooms and floors, see Vintage Old Shanghai Stone Mosaic: 10 Rooms for a Green Marble Floor Pattern.

Back to Pattern reference