Strip Mosaic Tiles 45x195mm: A Guide to Model 19508
The pale joints in the 19508 kitchen image are as noticeable as the dark tile faces. Change the grout contrast or turn the strips horizontally and the same format will read differently. Choose that grid before trying to match the surface to a cabinet color.
The strip mosaic tiles in model 19508 have individual pieces measuring 45 × 195 mm, supplied on rectangular mesh sheets. The current product page sells a sample sheet, with project quantities handled separately. That distinction is worth understanding before using the displayed price or packing information to plan a purchase.
Official product styling image, used as a design reference rather than a verified installation case study.
Read the Chip, Sheet, and Box Sizes Separately
The 45 × 195 mm measurement belongs to each strip; 288 × 198 mm describes the mounted sheet. The box figures describe a separate quantity of sheets. Keep those three units separate when discussing a layout, because the current product-page purchase is only one sample sheet.
| Detail | Current listing specification |
|---|---|
| Model | 19508 |
| Individual chip | 45 × 195 mm |
| Mesh sheet | 288 × 198 mm |
| Thickness | 6.5 mm |
| Finish label | Solid Colour |
| Box packing | 22 sheets |
| Listed box coverage | 1.26 m² |
| Listed box weight | 17 kg |
| Current purchase | One sample sheet |
The specification image repeats these dimensions and packing figures. The stated box coverage is not a room-specific ordering allowance, and the box weight is not a confirmed delivered shipment weight. Cuts, spare material, packing, and shipping need to be addressed in the project quote.
A mesh-mounted mosaic tile still needs careful alignment between adjacent sheets. The backing groups the pieces, but the installer must make the gaps between sheets read consistently with the joints within them. Ask to see adjoining sheets together rather than judging the grid from one isolated sample.
What Model 19508 Looks Like in the Product Images
The official photographs show a black-looking face with noticeable reflections and some visible surface texture. These are observations from the images; the written finish field says “Solid Colour” without specifying a gloss rating. Compare the sample under your own lighting to judge both the darkness and the reflections.
Across a wall, the combination can be quite graphic: narrow dark rectangles separated by a lighter joint network. A darker grout choice would change that balance, letting the face of the tile carry more of the composition. Neither direction is automatically better; they create different relationships with the cabinetry.
For a solid colour mosaic, the real joints supply most of the visible pattern. Centering a row at an exposed wall end may matter more than centering a motif that does not exist. Compare the tile grid with the cabinet and socket positions before choosing how much joint contrast you want.
Do not interpret bright patches in a photograph as separate silver-colored tiles. Reflections are prominent in the product images, and one piece can look different across its face. A sample viewed from different angles is more useful than matching a cabinet color to the brightest part of a screen image.
Horizontal or Vertical: Choose the Direction First
Follow the countertop with horizontal strips
A horizontal arrangement can echo a long worktop, floating shelf, or run of cabinet handles. It gives the wall a direction that feels connected to those existing lines. Test it where the backsplash ends, since a short return may make the rhythm feel different from the long main wall.
The loose-sheet product photo shows horizontal strips, while other imagery presents a vertical orientation. Treat those as layout references, not evidence that the sheets arrive in several different factory patterns.
Use vertical strips to contrast with long cabinets
A vertical mosaic tile layout brings an upright rhythm against a horizontal countertop. It can be particularly noticeable beneath an open shelf, where the tile remains visible instead of disappearing behind appliances. A straight grid keeps that contrast easy to read.
Turning the sheet changes which sheet dimension runs across the wall. Include that change in the setting-out drawing rather than assuming the same sheet count will produce the same edge cuts in either direction.
Keep a custom pattern separate from the supplied grid
The photographs show parallel strips in aligned arrangements. A herringbone or staggered concept would need a separately confirmed layout and may require handling pieces differently from the supplied sheets. Do not assume a sample of strip mosaic tiles represents a ready-made sheet for every pattern you have seen elsewhere.
Plan the Backsplash Around Visible Edges and Interruptions
Begin with the wall that will actually remain visible. Mark sockets, cabinet bottoms, window reveals, shelves, and the outlines of appliances on a simple elevation. A narrow format produces many repeated lines, so a misplaced cut or abrupt endpoint can become conspicuous.
For a strip tile backsplash, compare the proposed grid at the exposed end before trying to center it everywhere. A symmetrical layout can still leave awkward slivers at a window or return. Ask the installer to show alternatives that balance the main view with those smaller junctions.
Where the tile meets a painted wall, decide how the edge will finish. The listed thickness is useful for the discussion, but it does not specify a matching trim, a finished side, or the total installed build-up. Review the actual edge treatment alongside the tile sample.
Sheet boundaries deserve the same attention as cut edges. A repeated change in spacing can reveal the rectangular backing units instead of the intended continuous grid. A trial arrangement of adjoining sheets helps expose that issue before the wall is fixed.
Consider the viewing angle from the room entrance too. Strong side lighting can make surface reflections and alignment more noticeable. The best-looking close-up is not always the arrangement that reads most clearly from across the kitchen.
Pair the Dark Surface with Grout, Cabinets, and Lighting
The official kitchen styling image places the dark strips against pale cabinetry and a light countertop. That contrast is a useful starting point if you want the backsplash to be the main dark element. It is not a requirement to copy the whole room.
With dark cabinet doors, compare differences in sheen as well as shade. A reflective backsplash beside a quieter cabinet finish can still create separation, while matching everything too closely may make the wall read as one large dark area. Put the physical finishes together before deciding.
Grout determines how strongly each rectangle stands out. A pale joint creates a more explicit grid, while a color nearer the tile face can soften that outline. Test the intended grout with the sample and ask for compatibility guidance rather than choosing by color alone.
Place the sample beneath the proposed task light. A continuous reflection near the cabinet base may draw attention to the top of the backsplash, while a different light position can change the whole balance. Check the view with the room lights both on and off.
If you prefer a different material and a matte appearance, compare the terracotta clay strip mosaic on 300 × 300 mm sheets. That separate listing describes terracotta clay/ceramic strips with a matte finish. It is an alternative to assess, not a matching accessory or evidence of 19508's material composition.
Order a Sample Before Planning the Full Quantity
The 19508 listing explicitly describes the purchase as one sample sheet. Its box figures provide packing information for the product, not a promise that the sample order contains 22 sheets. Ask for project pricing with the measured area, destination, and proposed layout.
The page also advertises a credit toward a later full project order. Confirm the applicable conditions and how that credit will be recorded before relying on it in your budget. Keep sample cost, project material cost, and freight as separate lines in the quotation.
Use the 45x195mm strip mosaic sample to review color, reflections, the mesh arrangement, and edge details. The published specification does not identify the material composition or a dimensional tolerance range. Request those details, together with appropriate installation and care instructions, where they affect the project.
The detailed application field names kitchen backsplashes, bathrooms, and interior walls. Other parts of the page contain broader pool-related categories, but the listing does not specify water absorption or slip ratings. Those labels are not a technical approval for a submerged installation or a floor; obtain documented suitability for the particular location and assembly.
FAQ
Is 45 × 195 mm the size of a complete sheet?
No, it is the size of an individual strip. The listed mesh sheet measures 288 × 198 mm, and the stated thickness is 6.5 mm.
Does the current product order include a full box?
The page identifies the purchase as one sample sheet. The 22-sheet box information relates to packing, so request a separate quote for the quantity needed for your project.
Can I arrange these strips vertically?
The product imagery includes a vertical arrangement, which is a useful design option to discuss with the installer. Confirm the orientation and resulting sheet dimensions on the wall before approving cuts and the final quantity.
Is the tile officially described as black gloss?
The photographs look black and reflective, but the written finish field is “Solid Colour.” Confirm the appearance with a physical sample rather than treating the photographs as an official color or gloss specification.
Do the pool tags mean it is approved for pool installations?
No, a product category or tag does not establish technical suitability for a particular installation. Before specifying these strip mosaic tiles for a pool, ask for the relevant product and fixing-system documentation and have the project requirements reviewed.
Order a Sample or Request a Project Quote
Email service@grmosaic.com to ask about a sample of strip mosaic tiles, specifying model 19508. For a project quote, include the measured wall area, a layout drawing, the intended application, and your destination ZIP or postal code. Ask for sample costs, any applicable credit terms, bulk pricing, and shipping charges separately, then approve the sample and installation details before ordering the full quantity.